{"title":"Turbochargers \u0026 Kits","description":"\u003cp data-start=\"237\" data-end=\"458\" class=\"\"\u003eDeliver serious power with \u003cstrong data-start=\"264\" data-end=\"288\"\u003eTurbochargers \u0026amp; Kits\u003c\/strong\u003e from Torque Lab. Whether you're going for a top-mount street setup or a full-blown track build, a well-matched turbo system is the heart of any forced induction project.\u003c\/p\u003e\n\u003cp data-start=\"460\" data-end=\"695\" class=\"\"\u003eWe supply complete kits as well as individual components like turbos, manifolds, downpipes, oil lines, and intercoolers. From responsive twin-scroll setups to high-horsepower single turbos — we’ve got options for every goal and budget.\u003c\/p\u003e\n\u003cp data-start=\"697\" data-end=\"809\" class=\"\"\u003eWith quality units from Garrett, Precision, BorgWarner, and HKS, you can trust in boost that’s built to last.\u003c\/p\u003e\n\u003chr data-start=\"811\" data-end=\"814\" class=\"\"\u003e\n\u003cp data-start=\"816\" data-end=\"836\" class=\"\"\u003e🔧 \u003cstrong data-start=\"819\" data-end=\"836\"\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"838\" data-end=\"1089\"\u003e\n\u003cli data-start=\"838\" data-end=\"885\" class=\"\"\u003e\n\u003cp data-start=\"840\" data-end=\"885\" class=\"\"\u003eMassive horsepower gains with correct setup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"886\" data-end=\"933\" class=\"\"\u003e\n\u003cp data-start=\"888\" data-end=\"933\" class=\"\"\u003eComplete bolt-on kits and custom components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"934\" data-end=\"989\" class=\"\"\u003e\n\u003cp data-start=\"936\" data-end=\"989\" class=\"\"\u003eOptions for top-mount, twin-scroll and single turbo\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"990\" data-end=\"1041\" class=\"\"\u003e\n\u003cp data-start=\"992\" data-end=\"1041\" class=\"\"\u003eCompatible with forged internals and tuned ECUs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1042\" data-end=\"1089\" class=\"\"\u003e\n\u003cp data-start=\"1044\" data-end=\"1089\" class=\"\"\u003eIdeal for street, drift, drag, or time attack\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1091\" data-end=\"1094\" class=\"\"\u003e\n\u003cp data-start=\"1096\" data-end=\"1112\" class=\"\"\u003e💡 \u003cstrong data-start=\"1099\" data-end=\"1112\"\u003eBest For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1114\" data-end=\"1244\" class=\"\"\u003e✔ High-performance street builds\u003cbr data-start=\"1146\" data-end=\"1149\"\u003e✔ Custom turbo conversions and upgrades\u003cbr data-start=\"1188\" data-end=\"1191\"\u003e✔ Track, drag or drift setups\u003cbr data-start=\"1220\" data-end=\"1223\"\u003e✔ Boost-hungry tuners\u003c\/p\u003e","products":[{"product_id":"infinity-design-carbon-fibre-turbo-inlets-bmw-f12-m6-grand-coupe-s63-v8","title":"Infinity Design Carbon Fibre Turbo Inlets BMW F12 M6 Grand Coupe S63 V8","description":null,"brand":"Infinity Design","offers":[{"title":"Gloss","offer_id":55226767475071,"sku":"INF-F1X-S63-TI-G","price":798.0,"currency_code":"EUR","in_stock":true},{"title":"Matt","offer_id":55226767507839,"sku":"INF-F1X-S63-TI-M","price":798.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/infinity-design-carbon-fibre-turbo-inlets-bmw-f12-m6-grand-coupe-s63-v8-intake-pipes-843.webp?v=1742595784"},{"product_id":"turbo-kit-b-serie","title":"Turbo Kit (B-serie)","description":"\u003cul class=\"list-bullets\"\u003e\n\u003cli\u003e Exhaust Manifold:\u003c\/li\u003e\n\u003cli\u003e -Cast iron\u003c\/li\u003e\n\u003cli\u003e Downpipe:\u003c\/li\u003e\n\u003cli\u003e -2.5\" RVS Turbo DownPipe\u003c\/li\u003e\n\u003cli\u003e -5 bout Exhaust Flange\u003c\/li\u003e\n\u003cli\u003e T04E Turbo:\u003c\/li\u003e\n\u003cli\u003e -T3 Flange to Manifold\u003c\/li\u003e\n\u003cli\u003e -5 Bolt Hot Side Downpipe Flange\u003c\/li\u003e\n\u003cli\u003e -.50 A\/R Compressor\u003c\/li\u003e\n\u003cli\u003e -.63 A\/R Turbine\u003c\/li\u003e\n\u003cli\u003e -3\" Inlet \u0026amp; 2\" Outlet\u003c\/li\u003e\n\u003cli\u003e -1\/8 NPT Oil Inlet\u003c\/li\u003e\n\u003cli\u003e Wastegate:\u003c\/li\u003e\n\u003cli\u003e -38mm 8 psi Wastegate\u003c\/li\u003e\n\u003cli\u003e Intercooler Kit:\u003c\/li\u003e\n\u003cli\u003e -Front Mount Intercooler\u003c\/li\u003e\n\u003cli\u003e -Overall Size: 70cm x 23cm x 8cm\u003c\/li\u003e\n\u003cli\u003e -2.5\" Inlet \u0026amp; Outlet\u003c\/li\u003e\n\u003cli\u003e 2.5” Aluminum Piping Kit with Silicon Hoses and Blow Off Valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"US-Racing","offers":[{"title":"Default Title","offer_id":55667021578623,"sku":"TK-C92-B-I","price":1450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/usr_tk_c92_d_i_t3_3_2c16.jpg?v=1751721749"},{"product_id":"turbo-kit-d-serie","title":"Turbo Kit (D-serie)","description":"\u003cul class=\"list-bullets\"\u003e\n\u003cli\u003e Exhaust Manifold:\u003c\/li\u003e\n\u003cli\u003e -Cast iron\u003c\/li\u003e\n\u003cli\u003e Downpipe:\u003c\/li\u003e\n\u003cli\u003e -2.5\" RVS Turbo DownPipe\u003c\/li\u003e\n\u003cli\u003e -5 bout Exhaust Flange\u003c\/li\u003e\n\u003cli\u003e T04E Turbo:\u003c\/li\u003e\n\u003cli\u003e -T3 Flange to Manifold\u003c\/li\u003e\n\u003cli\u003e -5 Bolt Hot Side Downpipe Flange\u003c\/li\u003e\n\u003cli\u003e -.50 A\/R Compressor\u003c\/li\u003e\n\u003cli\u003e -.63 A\/R Turbine\u003c\/li\u003e\n\u003cli\u003e -3\" Inlet \u0026amp; 2\" Outlet\u003c\/li\u003e\n\u003cli\u003e -1\/8 NPT Oil Inlet\u003c\/li\u003e\n\u003cli\u003e Wastegate:\u003c\/li\u003e\n\u003cli\u003e -38mm 8 psi Wastegate\u003c\/li\u003e\n\u003cli\u003e Intercooler Kit:\u003c\/li\u003e\n\u003cli\u003e -Front Mount Intercooler\u003c\/li\u003e\n\u003cli\u003e -Overall Size: 70cm x 23cm x 8cm\u003c\/li\u003e\n\u003cli\u003e -2.5\" Inlet \u0026amp; Outlet\u003c\/li\u003e\n\u003cli\u003e 2.5” Aluminum Piping Kit with Silicon Hoses and Blow Off Valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"US-Racing","offers":[{"title":"Default Title","offer_id":55667021611391,"sku":"TK-C92-D-I","price":1450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/usr_tk_c92_d_i_t3_3_2c16_d2a68a0a-d484-4840-bc7a-88f6e093abb4.jpg?v=1751721752"},{"product_id":"turbo-kit-k-serie","title":"Turbo Kit (K-serie)","description":"\u003ch2\u003eThis Turbo Kit consists of:\u003c\/h2\u003e\u003cp\u003eExhaust manifold:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCast iron\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDownpipe:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2.5inch stainless steel turbo Downpipe with 5 bolt flange\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eT04E Turbo:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTurbo with T3 Flange to Manifold with 5 bolt hot side downpipe flange\u003c\/li\u003e\n\u003cli\u003e.50 A\/R Compressor\u003c\/li\u003e\n\u003cli\u003e.63 A\/R turbine\u003c\/li\u003e\n\u003cli\u003e1\/8 NPT oil inlet and return line kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWastegate:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e38mm 8 psi wastegate\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIntercooler kit:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntercooler 70cm x 17.5cm x 5.5cm with 2.5inch connection\u003c\/li\u003e\n\u003cli\u003e2.5inch aluminum tube set with silicone hoses and clamps\u003c\/li\u003e\n\u003cli\u003eBoost controller\u003c\/li\u003e\n\u003cli\u003eAir filter\u003c\/li\u003e\n\u003cli\u003eBlow off valve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"US-Racing","offers":[{"title":"Default Title","offer_id":55667021644159,"sku":"TK-C01-K-I","price":1799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/TK_C01_K_I_a50a.jpg?v=1751721758"},{"product_id":"ktd-htb-t25","title":"K-Tuned Turbo Blanket  - T25 (Typically OEM Turbochargers)","description":null,"brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":56113609343359,"sku":"KTD-HTB-T25","price":206.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/KTD-HTB-T25-1.jpg?v=1758838429"},{"product_id":"ts-2-turbocharger-water-cooled-6466-v-band-reverse-rotation-0-82ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6466 V-Band Reverse Rotation 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6466 V-Band Reverse Rotation 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6466 V-Band Reverse Rotation 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil-cooled turbochargers    \nTS-2 oil and water-cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegate options are available    \n\u003cbr\u003e    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD-driven designed housings for optimal ARs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cbr\u003e    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 64mm    \nTurbine Inlet: V-Band (2.25\")   \nTurbine Exducer: 66mm    \nTurbine AR: 0.1.00   \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231387165055,"sku":"TS-2-6466B-VR082E","price":2551.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/38c8132bb7453df77aa3d90407e5da1daffdb66f_TS_2_6466B_VR082E_1.jpg?v=1774646386"},{"product_id":"ts-2-turbocharger-water-cooled-6466-t4-divided-0-84ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6466 T4 Divided 0.84AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6466 T4 Divided 0.84AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6466 T4 Divided 0.84AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil-cooled turbochargers    \nTS-2 oil and water-cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegate options are available    \n\u003cbr\u003e    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD-driven designed housings for optimal A\/R's and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cbr\u003e    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 64mm    \nTurbine Inlet: T4 Divided Flange    \nTurbine Exducer: 66mm    \nTurbine AR: 0.84   \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231387427199,"sku":"TS-2-6466B-D4084E","price":2447.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/0fbdefd4e5356fe053d9e30c82acb647de913842_TS_2_6466B_D4084E_1.jpg?v=1774646391"},{"product_id":"turbocharger-v-band-weld-flange-suit-turbine-inlet-3-00-frame-3","title":"Turbocharger V-Band Weld Flange Suit Turbine Inlet 3.00\" (Frame 3)","description":"\u003ch2\u003eTurbocharger V-Band Weld Flange Suit Turbine Inlet 3.00\" (Frame 3)\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger V-Band Weld Flange Suit Turbine Inlet 3.00\" (Frame 3)\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003eStainless Steel weld flange suit turbine housing V-Band inlet as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for fitment to your turbocharger manifold in order to secure your turbocharger.\u003cbr\u003e\u003cbr\u003e \nTurbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003e \n\u003cb\u003eNotes: This is the 3.00″ Weld Flange. It is recomended you measure and confirm this diameter is suitable before ordering\u003c\/b\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231387525503,"sku":"TS-19WFVI3-300","price":32.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/04a4ee60931dcf6207a662fc5dac6599ee8ecc0c_TS_19WFVI3_300_1.jpg?v=1774646394"},{"product_id":"ts-1-turbocharger-6466-t4-0-82ar-externally-wastegated","title":"TS-1 Turbocharger 6466 T4 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6466 T4 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6466 T4 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.      \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/R's and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 64mm    \nTurbine Inlet: T4 Flange    \nTurbine Exducer: 66mm    \nTurbine AR: 0.82    \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231387951487,"sku":"TS-1-6466B-T4082E","price":2414.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/a8993b475a219f835ce33da68279ad4d5e79420e_TS_1_6466B_T4082E_1.jpg?v=1774646408"},{"product_id":"ts-1-turbocharger-5862-v-band-0-82ar-internally-wastegated-14psi","title":"TS-1 Turbocharger 5862 V-Band 0.82AR Internally Wastegated (14psi)","description":"\u003ch2\u003eTS-1 Turbocharger 5862 V-Band 0.82AR Internally Wastegated (14psi)\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 5862 V-Band 0.82AR Internally Wastegated (14psi)\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/Rs and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 58mm     \nTurbine Inlet: V-Band (2.25\")     \nTurbine Exducer: 62mm     \nTurbine AR: 0.82     \nTurbine Outlet: V-Band (3.00\")     \nWeight: 7.40kg \/ 16.3lbs     \nHorsepower Rating: 725-835HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231391523199,"sku":"TS-1-5862B-VB082I","price":2584.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/23b4b56b1aa8d9aa4e6802f3d26e6109d0dd0582_TS_1_5862B_VB082I_1.jpg?v=1774646468"},{"product_id":"ts-1-turbocharger-7170-kompact-v-band-reverse-rotation-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 7170 (Kompact) V-Band Reverse Rotation 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7170 (Kompact) V-Band Reverse Rotation 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7170 (Kompact) V-Band Reverse Rotation 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/Rs and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 71mm   \nTurbine Inlet: V-Band (3.00\")   \nTurbine Exducer: 70mm   \nTurbine AR: 0.96   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.43kg \/ 14.17bs   \nHorsepower Rating: 875-1010HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231391719807,"sku":"TS-1-7170B-VR096E","price":3013.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/8b2252c0722a256032d05ec9c66907b436ba1306_TS_1_7170B_VR096E_1.jpg?v=1774646470"},{"product_id":"ts-1-turbocharger-v-band-clamp-suit-turbine-4-00","title":"TS-1 Turbocharger V-Band Clamp Suit Turbine 4.00\"","description":"\u003ch2\u003eTS-1 Turbocharger V-Band Clamp Suit Turbine 4.00\"\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTS-1 Turbocharger V-Band Clamp Suit Turbine 4.00\"\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003e\u003cp\u003eTurbine Housing V-Band Clamp as fitted to TS-1 and TS-2 turbochargers series. This direct replacement spare part is suitable for securing your turbine housing outlet to your exhaust system.\u003cbr\u003e\u003cbr\u003eTurbosmart genuine spares and accessories are produced to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003eNotes: This Clamp is the 4.00″ Clamp. You should measure and confirm that this diameter is suitable before ordering.\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231394177407,"sku":"TS-19CLV-400","price":47.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/d6b6e454f97a3ab21f9f65c296b08810d0067afe_TS_19CLV_400_1.jpg?v=1774646519"},{"product_id":"ts-1-turbocharger-6466-t4-divided-1-00ar-externally-wastegated","title":"TS-1 Turbocharger 6466 T4 Divided 1.00AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6466 T4 Divided 1.00AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6466 T4 Divided 1.00AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/R's and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 64mm   \nTurbine Inlet: T4 Divided Flange   \nTurbine Exducer: 66mm   \nTurbine AR: 1.00   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231395455359,"sku":"TS-1-6466B-D4100E","price":2485.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/51562b20a63184fbfe9ab1e7dc229efaf341e443_TS_1_6466B_D4100E_1.jpg?v=1774646539"},{"product_id":"ts-1-turbocharger-6466-v-band-0-82ar-externally-wastegated-reversed-rotation","title":"TS-1 Turbocharger 6466 V-Band 0.82AR Externally Wastegated (Reversed Rotation)","description":"\u003ch2\u003eTS-1 Turbocharger 6466 V-Band 0.82AR Externally Wastegated (Reversed Rotation)\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6466 V-Band 0.82AR Externally Wastegated (Reversed Rotation)\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious AR’s options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal AR’s and flow   \n713C Inconel turbine wheel for extreme EGT’s   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 64mm   \nTurbine Inlet: V-Band (2.25\")   \nTurbine Exducer: 66mm   \nTurbine AR: 0.82   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231396864383,"sku":"TS-1-6466B-VR082E","price":2496.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/1dff2157820f2cc09d4b16be752f26a4407cbc65_TS_1_6466B_VR082E_1.jpg?v=1774646551"},{"product_id":"ts-2-turbocharger-water-cooled-6870-kompact-v-band-0-96ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6870 (Kompact) V-Band 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6870 (Kompact) V-Band 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6870 (Kompact) V-Band 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil-cooled turbochargers    \nTS-2 oil and water-cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegate options are available    \n\u003cbr\u003e    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD-driven designed housings for optimal ARs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cbr\u003e    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 68mm    \nTurbine Inlet: V-Band (3.00\")   \nTurbine Exducer: 70mm    \nTurbine AR: 0.96   \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 850-990HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231400108415,"sku":"TS-2-6870B-VB096E","price":2892.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/cafdd847321c72e574986652af905548760424d8_TS_2_6870B_VB096E_1.jpg?v=1774646604"},{"product_id":"ts-2-turbocharger-water-cooled-7170-kompact-v-band-1-07ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 7170 (Kompact) V-Band 1.07AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 7170 (Kompact) V-Band 1.07AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 7170 (Kompact) V-Band 1.07AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.    \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.    \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil-cooled turbochargers     \nTS-2 oil and water-cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegate options are available     \n\u003cbr\u003e     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD-driven designed housings for optimal A\/R's and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cbr\u003e     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 71mm     \nTurbine Inlet: V-Band (2.25\")    \nTurbine Exducer: 70mm     \nTurbine AR: 1.07    \nTurbine Outlet: V-Band (3.00\")     \nWeight: 6.06kg \/ 13.3lbs     \nHorsepower Rating: 875-1010HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231400370559,"sku":"TS-2-7170B-VB107E","price":3068.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/3faaa9ff6c5021bc1669a183ac73c6ba3f6465dc_TS_2_7170B_VB107E_1.jpg?v=1774646609"},{"product_id":"turbocharger-v-band-weld-flange-turbine-outlet-3-50-frame-3","title":"Turbocharger V-Band Weld Flange Turbine Outlet 3.50\" (Frame 3)","description":"\u003ch2\u003eTurbocharger V-Band Weld Flange Turbine Outlet 3.50\" (Frame 3)\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger V-Band Weld Flange Turbine Outlet 3.50\" (Frame 3)\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003eStainless Steel weld flange suit turbine housing V-Band outlet as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for fitment to your exhaust system.\u003cbr\u003e\u003cbr\u003e \nTurbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003e \n\u003cb\u003eNotes: This is the 3.50″ Weld Flange. It is recomended you measure and confirm this diameter is suitable before ordering\u003c\/b\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231400927615,"sku":"TS-19WFVO3-350","price":38.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/a67d85e9f8e899bd53c204cac47a16d239327c80_TS_19WFVO3_350_1.jpg?v=1774646620"},{"product_id":"ts-2-turbocharger-water-cooled-6466-t4-divided-1-00ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6466 T4 Divided 1.00AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6466 T4 Divided 1.00AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6466 T4 Divided 1.00AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil-cooled turbochargers    \nTS-2 oil and water-cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegate options are available    \n\u003cbr\u003e    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD-driven designed housings for optimal ARs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cbr\u003e    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 64mm    \nTurbine Inlet: T4 Divided Flange    \nTurbine Exducer: 66mm    \nTurbine AR: 0.1.00   \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231401746815,"sku":"TS-2-6466B-D4100E","price":2447.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/f04befc7507adb9a00b5f0b0b6671a5977269436_TS_2_6466B_D4100E_1.jpg?v=1774646628"},{"product_id":"ts-2-turbocharger-water-cooled-6870-kompact-t4-0-82ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6870 (Kompact) T4 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6870 (Kompact) T4 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6870 (Kompact) T4 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil-cooled turbochargers     \nTS-2 oil and water-cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegate options are available     \n\u003cbr\u003e     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD-driven designed housings for optimal ARs and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cbr\u003e     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 68mm     \nTurbine Inlet: T4 Flange     \nTurbine Exducer: 70mm     \nTurbine AR: 0.82    \nTurbine Outlet: V-Band (3.00\")     \nWeight: 6.06kg \/ 13.3lbs     \nHorsepower Rating: 850-990HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231402729855,"sku":"TS-2-6870B-T4082E","price":2832.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/744c9045e0e4aab6157baee13eee91cd86803251_TS_2_6870B_T4082E_1.jpg?v=1774646649"},{"product_id":"ts-1-turbocharger-6262-t3-0-63ar-externally-wastegated","title":"TS-1 Turbocharger 6262 T3 0.63AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6262 T3 0.63AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6262 T3 0.63AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious AR?s options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal ARs and flow   \n713C Inconel turbine wheel for extreme EGTs   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 62mm   \nTurbine Inlet: T3 Flange   \nTurbine Exducer: 62mm   \nTurbine AR: 0.63   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 760-880HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231403155839,"sku":"TS-1-6262B-T3063E","price":2199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/556b3d232345b14d076b098546d31f8480f5187a_TS_1_6262B_T3063E_1.jpg?v=1774646655"},{"product_id":"ts-2-turbocharger-water-cooled-6262-t4-0-82ar-externally-wastegated","title":"TS-2 Turbocharger(Water Cooled) 6262 T4 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger(Water Cooled) 6262 T4 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger(Water Cooled) 6262 T4 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.     \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/R's and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 62mm    \nTurbine Inlet: T4 Flange    \nTurbine Exducer: 62mm    \nTurbine AR: 0.82    \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 760-880HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231406072191,"sku":"TS-2-6262B-T4082E","price":2260.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/c8c6994c574ba83a26bf07e4d737dda59b406474_TS_2_6262B_T4082E_1.jpg?v=1774646690"},{"product_id":"ts-1-turbocharger-6466-t4-divided-0-84ar-externally-wastegated","title":"TS-1 Turbocharger 6466 T4 Divided 0.84AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6466 T4 Divided 0.84AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6466 T4 Divided 0.84AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/R's and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 64mm   \nTurbine Inlet: T4 Divided Flange   \nTurbine Exducer: 66mm   \nTurbine AR: 0.84   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231406858623,"sku":"TS-1-6466B-D4084E","price":2485.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/77c7fe140c96f8acdfa7c065912717a26bc011d1_TS_1_6466B_D4084E_1.jpg?v=1774646707"},{"product_id":"ts-1-turbocharger-6870-kompact-t4-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 6870 (Kompact) T4 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6870 (Kompact) T4 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6870 (Kompact) T4 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/Rs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 68mm    \nTurbine Inlet: T4     \nTurbine Exducer: 70mm    \nTurbine AR: 0.96    \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.86kg \/ 15.1lbs    \nHorsepower Rating: 850-990HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231409185151,"sku":"TS-1-6870B-T4096E","price":2705.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/e243ae26eb00c2567541cfb70ecd3c3c36ce9900_TS_1_6870B_T4096E_1.jpg?v=1774646741"},{"product_id":"turbocharger-v-band-weld-flange-suit-turbine-inlet-2-25-frame-2","title":"Turbocharger V-Band Weld Flange Suit Turbine Inlet 2.25\" (Frame 2)","description":"\u003ch2\u003eTurbocharger V-Band Weld Flange Suit Turbine Inlet 2.25\" (Frame 2)\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger V-Band Weld Flange Suit Turbine Inlet 2.25\" (Frame 2)\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003eStainless Steel weld flange suit turbine housing V-Band inlet as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for fitment to your turbocharger manifold in order to secure your turbocharger.\u003cbr\u003e\u003cbr\u003e \nTurbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003e \n\u003cb\u003eNotes: This is the 2.25″ Weld Flange. It is recomended you measure and confirm this diameter is suitable before ordering\u003c\/b\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231410692479,"sku":"TS-19WFVI2-225","price":28.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/2b54d6b70599e260072b811040ae6e43a04e71ca_TS_19WFVI2_225_1.jpg?v=1774646764"},{"product_id":"turbocharger-t4-divided-inlet-weld-flange-mild-steel","title":"Turbocharger T4 Divided Inlet Weld Flange (Mild Steel)","description":"\u003ch2\u003eTurbocharger T4 Divided Inlet Weld Flange (Mild Steel)\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger T4 Divided Inlet Weld Flange (Mild Steel)\u003c\/strong\u003e is a Turbosmart turbocharger solution developed for high-performance applications where response, durability and proven motorsport engineering matter.\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231411085695,"sku":"TS-19WFD4-MS","price":37.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/3ecd63baca7467c278ae177fd505532f586a56d8_TS_19WFD4_MS_1.jpg?v=1774646771"},{"product_id":"ts-2-turbocharger-water-cooled-5862-v-band-0-82ar-internally-wastegated-14psi","title":"TS-2 Turbocharger (Water Cooled) 5862 V-Band 0.82AR Internally Wastegated (14psi)","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 5862 V-Band 0.82AR Internally Wastegated (14psi)\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 5862 V-Band 0.82AR Internally Wastegated (14psi)\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.      \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/R's and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 58mm     \nTurbine Inlet: V-Band (2.25\")     \nTurbine Exducer: 62mm     \nTurbine AR: 0.82     \nTurbine Outlet: V-Band (3.00\")     \nWeight: 6.06kg \/ 13.3lbs     \nHorsepower Rating: 725-835HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231412724095,"sku":"TS-2-5862B-VB082I","price":2551.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/981b23f8818b9d0b4049fc3dcf244eb8551a888a_TS_2_5862B_VB082I_1.jpg?v=1774646803"},{"product_id":"turbocharger-gasket-oil-return-paper-50-8mm","title":"Turbocharger Gasket - Oil Return (Paper) 50.8mm","description":"\u003ch2\u003eTurbocharger Gasket - Oil Return (Paper) 50.8mm\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger Gasket - Oil Return (Paper) 50.8mm\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003e\u003cp\u003eTurbocharger oil drain gasket suit TS-1 and TS-2 50.8mm (2.0\") turbocharger series.\u003cbr\u003e\u003cbr\u003eTurbosmart genuine spares and accessories are produced to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought; they are the components Turbosmart uses in the hand assembly of your product. They are simply made available as a product you can use yourself to update, service, or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003eNotes: Suits 50.8mm \/ 2.0\" bolts spacing\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231416328575,"sku":"TS-19-GK-50","price":4.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/1ab9cf54d5ad344e5bac6fee6c4f879f8294aa41_TS_19_GK_50_1.jpg?v=1774646858"},{"product_id":"ts-1-turbocharger-6870-kompact-d4-1-00ar-externally-wastegated","title":"TS-1 Turbocharger 6870 (Kompact) D4 1.00AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6870 (Kompact) D4 1.00AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6870 (Kompact) D4 1.00AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.     \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/Rs and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 68mm     \nTurbine Inlet: T4 Divided     \nTurbine Exducer: 70mm     \nTurbine AR: 1.00     \nTurbine Outlet: V-Band (3.00\")     \nWeight: 6.86kg \/ 15.1lbs     \nHorsepower Rating: 850-990HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231417016703,"sku":"TS-1-6870B-D4100E","price":2777.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/02063342e33719dec829f5ba9dc75a560fe68c3b_TS_1_6870B_D4100E_1.jpg?v=1774646872"},{"product_id":"ts-2-turbocharger-water-cooled-5862-v-band-0-82ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 5862 V-Band 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 5862 V-Band 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 5862 V-Band 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.  \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.  \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.  \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.    \n\u003cbr\u003e\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious AR?s options   \nInternal and external wastegated options available   \n\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal ARs and flow   \n713C Inconel turbine wheel for extreme EGTs   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 58mm   \nTurbine Inlet: V-Band (2.25\")   \nTurbine Exducer: 62mm   \nTurbine AR: 0.82   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 725-835HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231418720639,"sku":"TS-2-5862B-VB082E","price":2342.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/16cdff919a06a5f099161f20570506dc8c15e6a8_TS_2_5862B_VB082E_1.jpg?v=1774646900"},{"product_id":"ts-1-turbocharger-7275-v-band-reverse-rotation-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 7275 V-Band Reverse Rotation 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7275 V-Band Reverse Rotation 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7275 V-Band Reverse Rotation 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.    \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.    \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.      \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.      \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.      \n\u003cb\u003eAvailable In\u003c\/b\u003e      \nTS-1 oil cooled turbochargers      \nTS-2 oil and water cooled turbochargers      \nV-Band, various T3 Flange and T4 Flange options      \nReverse rotation (Selected Sizes)      \nVarious A\/R options      \nInternal and external wastegated options available      \n\u003cb\u003eFeatures\u003c\/b\u003e      \nUnparalleled transient response      \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels      \nLightweight 310s stainless steel investment cast turbine housings      \nLightweight, Aluminium compressor covers      \nCFD driven designed housings for optimal A\/Rs and flow      \n713C Inconel turbine wheel for extreme EGT's      \nVSR speed balanced      \nProprietary dual ceramic bearing system      \nIntegrated Iron backplate on center housing      \n\u003cb\u003eSpecifications\u003c\/b\u003e      \nCompressor Inlet: 4\" \/ 101.6mm      \nCompressor Inducer: 72mm      \nTurbine Inlet: V-Band (3.00\")      \nTurbine Exducer: 75mm      \nTurbine AR: 0.96      \nTurbine Outlet: V-Band (3.50\")      \nWeight: 9.63kg \/ 20.23lbs      \nHorsepower Rating: 1050-1240HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231419507071,"sku":"TS-1-7275C-VR096E","price":3074.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/7a2b90ed76df2f6f86b5330b55d57142b4458ce6_TS_1_7275C_VR096E_1.jpg?v=1774646915"},{"product_id":"ts-1-turbocharger-6870-kompact-v-band-reverse-rotation-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 6870 (Kompact) V-Band Reverse Rotation 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6870 (Kompact) V-Band Reverse Rotation 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6870 (Kompact) V-Band Reverse Rotation 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/Rs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 68mm    \nTurbine Inlet: V-Band (3.00\")    \nTurbine Exducer: 70mm    \nTurbine AR: 0.96    \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.43kg \/ 14.17bs    \nHorsepower Rating: 850-990HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231419638143,"sku":"TS-1-6870B-VR096E","price":2837.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/008ed9accbe882eb922f3b3b682781dd9bc141f5_TS_1_6870B_VR096E_1.jpg?v=1774646918"},{"product_id":"ts-1-turbocharger-6870-t4-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 6870 T4 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6870 T4 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6870 T4 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.      \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/R's and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 68mm     \nTurbine Inlet: T4 Flange     \nTurbine Exducer: 70mm     \nTurbine AR: 0.96     \nTurbine Outlet: V-Band (3.50\")     \nWeight: 9.63kg \/ 20.23lbs     \nHorsepower Rating: 875-1035HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231421079935,"sku":"TS-1-6870C-T4096E","price":2777.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/75c64a323177ab5ccffc6c25791b88000599142e_TS_1_6870C_T4096E_1.jpg?v=1774646948"},{"product_id":"ts-2-turbocharger-water-cooled-6262-t3-0-63ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6262 T3 0.63AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6262 T3 0.63AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6262 T3 0.63AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.  \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.  \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.  \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/R's and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 62mm   \nTurbine Inlet: T3 Flange   \nTurbine Exducer: 62mm   \nTurbine AR: 0.63   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 760-880HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231422554495,"sku":"TS-2-6262B-T3063E","price":2260.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/0e3edc76d2c38f401112ed3d5747379c8da6ff52_TS_2_6262B_T3063E_1.jpg?v=1774646966"},{"product_id":"ts-1-turbocharger-6262-t3-0-82ar-externally-wastegated","title":"TS-1 Turbocharger 6262 T3 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6262 T3 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6262 T3 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.  \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious AR?s options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal ARs and flow   \n713C Inconel turbine wheel for extreme EGTs   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 62mm   \nTurbine Inlet: T3 Flange   \nTurbine Exducer: 62mm   \nTurbine AR: 0.82   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 760-880HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231423832447,"sku":"TS-1-6262B-T3082E","price":2199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/971444dae5c9159a8ee1d2643b0c903533b0f21c_TS_1_6262B_T3082E_1.jpg?v=1774646991"},{"product_id":"ts-1-turbocharger-7675-v-band-1-24ar-externally-wastegated","title":"TS-1 Turbocharger 7675 V-Band 1.24AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7675 V-Band 1.24AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7675 V-Band 1.24AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/Rs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 76mm    \nTurbine Inlet: V-Band (3.00\")    \nTurbine Exducer: 75mm    \nTurbine AR: 1.24    \nTurbine Outlet: V-Band (3.50\")    \nWeight: 9.63kg \/ 20.23lbs    \nHorsepower Rating: 1100-1290HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231423930751,"sku":"TS-1-7675C-VB124E","price":3129.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/2150d1fd7a4e39d0d083f20c6f4ea106bcbe0f59_TS_1_7675C_VB124E_1.jpg?v=1774646993"},{"product_id":"ts-2-turbocharger-water-cooled-6262-t3-0-82ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6262 T3 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6262 T3 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6262 T3 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.  \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.  \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.  \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.  \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil-cooled turbochargers   \nTS-2 oil and water-cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegate options are available   \n\u003cbr\u003e   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD-driven designed housings for optimal A\/Rs and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cbr\u003e   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 62mm   \nTurbine Inlet: T3 Flange   \nTurbine Exducer: 62mm   \nTurbine AR: 0.82   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 760-880HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231425667455,"sku":"TS-2-6262B-T3082E","price":2260.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/988165499e7ff7b71d6162e49e337ec3fc090029_TS_2_6262B_T3082E_1.jpg?v=1774647011"},{"product_id":"turbocharger-v-band-weld-flange-suit-4-00-frame-3","title":"Turbocharger V-Band Weld Flange Suit 4.00\" (Frame 3)","description":"\u003ch2\u003eTurbocharger V-Band Weld Flange Suit 4.00\" (Frame 3)\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger V-Band Weld Flange Suit 4.00\" (Frame 3)\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003eStainless Steel weld flange suit turbine housing V-Band outlet as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for fitment to your exhaust system.\u003cbr\u003e\u003cbr\u003e \nTurbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003e \n\u003cb\u003eNotes: This is the 4.00″ Weld Flange. It is recomended you measure and confirm this diameter is suitable before ordering\u003c\/b\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231433761151,"sku":"TS-19WFVO3T4-400","price":38.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/c68e0776d98e3a8883d50f03f4a14dffa6a44cd3_TS_19WFVO3T4_400_1.jpg?v=1774647090"},{"product_id":"ts-2-turbocharger-water-cooled-6466-t4-0-82ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6466 T4 0.82AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6466 T4 0.82AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6466 T4 0.82AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.   \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.   \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.   \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.     \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/R's and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 64mm    \nTurbine Inlet: T4 Flange    \nTurbine Exducer: 66mm    \nTurbine AR: 0.82    \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.06kg \/ 13.3lbs    \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231434613119,"sku":"TS-2-6466B-T4082E","price":2469.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/3621c1ba27082042a7cbe35ceebb51248d0d8f9b_TS_2_6466B_T4082E_1.jpg?v=1774647097"},{"product_id":"ts-1-turbocharger-7170-kompact-v-band-reverse-rotation-1-07ar-externally-wastegated","title":"TS-1 Turbocharger 7170 (Kompact) V-Band Reverse Rotation 1.07AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7170 (Kompact) V-Band Reverse Rotation 1.07AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7170 (Kompact) V-Band Reverse Rotation 1.07AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.  \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.    \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.    \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.   \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/Rs and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 71mm   \nTurbine Inlet: V-Band (2.25\")   \nTurbine Exducer: 70mm   \nTurbine AR: 1.07   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.43kg \/ 14.17bs   \nHorsepower Rating: 875-1010HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231435170175,"sku":"TS-1-7170B-VR107E","price":3013.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/ad6cf6c27fd14636d5b23d0e654e9250abb93b7d_TS_1_7170B_VR107E_1.jpg?v=1774647108"},{"product_id":"ts-2-turbocharger-water-cooled-5862-t3-0-63ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 5862 T3 0.63AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 5862 T3 0.63AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 5862 T3 0.63AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.  \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.  \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.  \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.  \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/R's and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 58mm   \nTurbine Inlet: T3 Flange   \nTurbine Exducer: 62mm   \nTurbine AR: 0.63   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 725-835HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231435268479,"sku":"TS-2-5862B-T3063E","price":2199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/f7998e98a35284a06e2c329ecd35ac8e1e444e5b_TS_2_5862B_T3063E_1.jpg?v=1774647110"},{"product_id":"ts-1-turbocharger-7170-kompact-v-band-1-07ar-externally-wastegated","title":"TS-1 Turbocharger 7170 (Kompact) V-Band 1.07AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7170 (Kompact) V-Band 1.07AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7170 (Kompact) V-Band 1.07AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/Rs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 71mm    \nTurbine Inlet: V-Band (2.25\")    \nTurbine Exducer: 70mm    \nTurbine AR: 1.07    \nTurbine Outlet: V-Band (3.00\")    \nWeight: 6.43kg \/ 14.17bs    \nHorsepower Rating: 875-1010HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231435563391,"sku":"TS-1-7170B-VB107E","price":3013.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/0b245cad3e4b2f6228626271210d6b88a13e7323_TS_1_7170B_VB107E_1.jpg?v=1774647116"},{"product_id":"ts-1-turbocharger-7275-t4-1-24ar-externally-wastegated","title":"TS-1 Turbocharger 7275 T4 1.24AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7275 T4 1.24AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7275 T4 1.24AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.    \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.    \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.      \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.      \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.     \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/Rs and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 72mm     \nTurbine Inlet: T4     \nTurbine Exducer: 75mm     \nTurbine AR: 1.24     \nTurbine Outlet: V-Band (3.50\")     \nWeight: 9.63kg \/ 20.23lbs     \nHorsepower Rating: 1050-1240HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231436251519,"sku":"TS-1-7275C-T4124E","price":2903.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/c2ef2abab5280c4d33ce986b561b0bf2bb277227_TS_1_7275C_T4124E_1.jpg?v=1774647120"},{"product_id":"ts-2-turbocharger-water-cooled-6466-t3-0-63ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 6466 T3 0.63AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 6466 T3 0.63AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 6466 T3 0.63AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.  \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.  \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.  \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil cooled turbochargers   \nTS-2 oil and water cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegated options available   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD driven designed housings for optimal A\/R's and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 64mm   \nTurbine Inlet: T3 Flange   \nTurbine Exducer: 66mm   \nTurbine AR: 0.63   \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 825-955HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231438283135,"sku":"TS-2-6466B-T3063E","price":2469.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/9c74e19e5d906a8419b232247ad8ac240150ae5d_TS_2_6466B_T3063E_1.jpg?v=1774647156"},{"product_id":"ts-1-turbocharger-6870-kompact-d4-0-84ar-externally-wastegated","title":"TS-1 Turbocharger 6870 (Kompact) D4 0.84AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 6870 (Kompact) D4 0.84AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 6870 (Kompact) D4 0.84AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.     \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/Rs and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 68mm     \nTurbine Inlet: T4 Divided     \nTurbine Exducer: 70mm     \nTurbine AR: 0.84     \nTurbine Outlet: V-Band (3.00\")     \nWeight: 6.86kg \/ 15.1lbs     \nHorsepower Rating: 850-990HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231441330559,"sku":"TS-1-6870B-D4084E","price":2777.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/5a9487b5d2c4e7bbe23cfbed3095b1593a079559_TS_1_6870B_D4084E_1.jpg?v=1774647192"},{"product_id":"ts-1-turbocharger-v-band-clamp-suit-turbine-2-25","title":"TS-1 Turbocharger V-Band Clamp Suit Turbine 2.25\"","description":"\u003ch2\u003eTS-1 Turbocharger V-Band Clamp Suit Turbine 2.25\"\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTS-1 Turbocharger V-Band Clamp Suit Turbine 2.25\"\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003eTurbine Housing V-Band Clamp as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for securing the turbine housing inlet to your manifold.\u003cbr\u003e\u003cbr\u003e \nTurbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003e \n\u003cb\u003eNotes: This Clamp is the 2.25″ Clamp. It is recommended you measure and confirm this diameter is suitable before ordering\u003c\/b\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231445950847,"sku":"TS-19CLV-225","price":38.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/aea14446f2b686d7b41f26a6aca81a24eea8d916_TS_19CLV_225_1.jpg?v=1774647223"},{"product_id":"turbocharger-v-band-weld-flange-turbine-outlet-3-00-frame-2","title":"Turbocharger V-Band Weld Flange Turbine Outlet 3.00\" (Frame 2)","description":"\u003ch2\u003eTurbocharger V-Band Weld Flange Turbine Outlet 3.00\" (Frame 2)\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eTurbocharger V-Band Weld Flange Turbine Outlet 3.00\" (Frame 2)\u003c\/strong\u003e is a genuine Turbosmart performance part designed for reliable operation, precise fitment and proven results on street and track builds.\u003c\/p\u003eStainless Steel weld flange suit turbine housing V-Band outlet as fitted to TS-1 and TS-2 turbochargers series. This is a direct replacement, spare part which is suitable for fitment to your exhaust system.\u003cbr\u003e\u003cbr\u003e \nTurbosmart genuine spares and accessories are produced in order to ensure the longest possible service life for your favourite Turbosmart gear. These spares and accessories are not an afterthought, they are the components Turbosmart use in the hand assembly of your product, simply made available as a product you can use yourself to update, service or rebuild your Turbosmart product.\u003cbr\u003e\u003cbr\u003e \n\u003cb\u003eNotes: This is the 3.00″ Weld Flange. It is recomended you measure and confirm this diameter is suitable before ordering\u003c\/b\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231446114687,"sku":"TS-19WFVO2-300","price":32.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/6e93ade51ab62500a11677bae84f87725c167a10_TS_19WFVO2_300_1.jpg?v=1774647226"},{"product_id":"ts-1-turbocharger-7675-v-band-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 7675 V-Band 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7675 V-Band 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7675 V-Band 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious A\/R options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal A\/Rs and flow    \n713C Inconel turbine wheel for extreme EGT's    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 76mm    \nTurbine Inlet: V-Band (3.00\")    \nTurbine Exducer: 75mm    \nTurbine AR: 0.96    \nTurbine Outlet: V-Band (3.50\")    \nWeight: 9.63kg \/ 20.23lbs    \nHorsepower Rating: 1100-1290HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231447589247,"sku":"TS-1-7675C-VB096E","price":3129.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/967467e6767021520c49b9197937d1ff31528927_TS_1_7675C_VB096E_1.jpg?v=1774647247"},{"product_id":"ts-1-turbocharger-7880-v-band-1-24ar-externally-wastegated","title":"TS-1 Turbocharger 7880 V-Band 1.24AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 7880 V-Band 1.24AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 7880 V-Band 1.24AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.     \n\u003cb\u003eAvailable In\u003c\/b\u003e     \nTS-1 oil cooled turbochargers     \nTS-2 oil and water cooled turbochargers     \nV-Band, various T3 Flange and T4 Flange options     \nReverse rotation (Selected Sizes)     \nVarious A\/R options     \nInternal and external wastegated options available     \n\u003cb\u003eFeatures\u003c\/b\u003e     \nUnparalleled transient response     \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels     \nLightweight 310s stainless steel investment cast turbine housings     \nLightweight, Aluminium compressor covers     \nCFD driven designed housings for optimal A\/Rs and flow     \n713C Inconel turbine wheel for extreme EGT's     \nVSR speed balanced     \nProprietary dual ceramic bearing system     \nIntegrated Iron backplate on center housing     \n\u003cb\u003eSpecifications\u003c\/b\u003e     \nCompressor Inlet: 4\" \/ 101.6mm     \nCompressor Inducer: 78mm     \nTurbine Inlet: V-Band (3.00\")     \nTurbine Exducer: 80mm     \nTurbine AR: 1.24     \nTurbine Outlet: V-Band (3.50\")     \nWeight: 9.63kg \/ 21.23bs     \nHorsepower Rating: 1140-1350HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231451357567,"sku":"TS-1-7880C-VB124E","price":3426.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/291d36bf688d800518fde656aff5ba4759791e3a_TS_1_7880C_VB124E_1.jpg?v=1774647308"},{"product_id":"ts-1-turbocharger-8280-t4-0-96ar-externally-wastegated","title":"TS-1 Turbocharger 8280 T4 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-1 Turbocharger 8280 T4 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-1 Turbocharger 8280 T4 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.   \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings are included.   \nThe TS-1 series are oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.     \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.     \nAll Turbosmart turbochargers have been designed with an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - while being smaller, lighter and faster in response than other solutions on the market.    \n\u003cb\u003eAvailable In\u003c\/b\u003e    \nTS-1 oil cooled turbochargers    \nTS-2 oil and water cooled turbochargers    \nV-Band, various T3 Flange and T4 Flange options    \nReverse rotation (Selected Sizes)    \nVarious AR’s options    \nInternal and external wastegated options available    \n\u003cb\u003eFeatures\u003c\/b\u003e    \nUnparalleled transient response    \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels    \nLightweight 310s stainless steel investment cast turbine housings    \nLightweight, Aluminium compressor covers    \nCFD driven designed housings for optimal AR’s and flow    \n713C Inconel turbine wheel for extreme EGT’s    \nVSR speed balanced    \nProprietary dual ceramic bearing system    \nIntegrated Iron backplate on center housing    \n\u003cb\u003eSpecifications\u003c\/b\u003e    \nCompressor Inlet: 4\" \/ 101.6mm    \nCompressor Inducer: 82mm    \nTurbine Inlet: T4    \nTurbine Exducer: 80mm    \nTurbine AR: 0.96    \nTurbine Outlet: V-Band (3.50\")    \nWeight: 9.63kg \/ 21.23bs    \nHorsepower Rating: 1225-1445HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231457288575,"sku":"TS-1-8280C-T4096E","price":3277.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/8d2829d49216b1b20f6e14762fb7ca5ac08da120_TS_1_8280C_T4096E_1.jpg?v=1774647409"},{"product_id":"ts-2-turbocharger-water-cooled-7170-kompact-v-band-0-96ar-externally-wastegated","title":"TS-2 Turbocharger (Water Cooled) 7170 (Kompact) V-Band 0.96AR Externally Wastegated","description":"\u003ch2\u003eTS-2 Turbocharger (Water Cooled) 7170 (Kompact) V-Band 0.96AR Externally Wastegated\u003c\/h2\u003e\u003cp\u003eUpgrade your turbo setup with the \u003cstrong\u003eTS-2 Turbocharger (Water Cooled) 7170 (Kompact) V-Band 0.96AR Externally Wastegated\u003c\/strong\u003e, a genuine Turbosmart wastegate designed for precise boost control, thermal stability and long-term reliability. This product is supplied with the technical notes: Fitment Requires Fabrication \/\/ Universal Product.\u003c\/p\u003eSmaller, Lighter and Faster - Turbosmart's turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a turbocharger range that meets the demands of both motorsport, and performance enthusiasts alike.  \nEvery Turbosmart turbocharger comes standard with everything you need for installation, weld flanges, V-band clamps, gaskets, oil feed and drain fittings as well as water feed and return fittings are included.  \nThe TS-2 series are water and oil cooled turbochargers with lightweight investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know Turbosmart for.  \nThe ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained.  \nThe TS-2 turbocharger series has taken an engine end-to-end approach aiming to achieve power through reduced back pressure and high performance turbines - While being smaller, lighter and faster in response than other solutions on the market.  \n\u003cb\u003eAvailable In\u003c\/b\u003e   \nTS-1 oil-cooled turbochargers   \nTS-2 oil and water-cooled turbochargers   \nV-Band, various T3 Flange and T4 Flange options   \nReverse rotation (Selected Sizes)   \nVarious A\/R options   \nInternal and external wastegate options are available   \n\u003cbr\u003e   \n\u003cb\u003eFeatures\u003c\/b\u003e   \nUnparalleled transient response   \nAggressive aerodynamics with 7+7 2618 Aluminium splitter wheels   \nLightweight 310s stainless steel investment cast turbine housings   \nLightweight, Aluminium compressor covers   \nCFD-driven designed housings for optimal A\/R's and flow   \n713C Inconel turbine wheel for extreme EGT's   \nVSR speed balanced   \nProprietary dual ceramic bearing system   \nIntegrated Iron backplate on center housing   \n\u003cbr\u003e   \n\u003cb\u003eSpecifications\u003c\/b\u003e   \nCompressor Inlet: 4\" \/ 101.6mm   \nCompressor Inducer: 71mm   \nTurbine Inlet: V-Band (3.00\")  \nTurbine Exducer: 70mm   \nTurbine AR: 0.96  \nTurbine Outlet: V-Band (3.00\")   \nWeight: 6.06kg \/ 13.3lbs   \nHorsepower Rating: 875-1010HP\u003ch3\u003eImportant Notes\u003c\/h3\u003e\u003cp\u003eFitment Requires Fabrication \/\/ Universal Product\u003c\/p\u003e\u003ch3\u003eWhy Buy from Torque Lab?\u003c\/h3\u003e\u003cp\u003eTorque Lab supplies genuine performance parts for serious street and track builds across Europe. We focus on technically correct fitment, strong SEO-friendly product support and proven brands trusted in the tuning scene.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":57231457976703,"sku":"TS-2-7170B-VB096E","price":3068.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/files\/2c58687a710584aee6926dc7e9ef204fd84219d7_TS_2_7170B_VB096E_1.jpg?v=1774647414"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/7497\/1519\/collections\/turbochargers-performance-kits-torque-lab.webp?v=1745348900","url":"https:\/\/torquelab.eu\/collections\/turbochargers-kits.oembed","provider":"Torque Lab","version":"1.0","type":"link"}