Forge Motorsport Inlet Duct for Fiat Abarth 500/595/695 — Induction Kit for Fiat 500 Abarth (Pre 595, 2008-2015). Technical specifications and compatibility are based on Forge Motorsport product data.
Product Details
- Lower IAT's
- Consistent IAT's
- Maximises airflow
- Perfect fit forFMINDF500
- OEM+ aesthetic
- Lifetime warranty
To assist with the cold air feed to the scuttle on the Abarth 500/595/695 Forge Motorsport developed an inlet duct which after testing in the crucible of motorsport, was found to keep a more consistent and lower IAT. With Forge Motorsport's Abarth induction kit (FMINDF500) also utilising the direct cold air feed to the scuttle panel, Forge Motorsport knew that these race proven gains could provide a valuable addition to Forge Motorsport's ever-popular FMINDF500 Abarth 500/595/695 induction kit.
Race Proven, Daily Drivenisn’t just the Forge Motorsport mantra, but it’s also the way Forge Motorsport look to develop Forge Motorsport's products. Forge Motorsport's technical partnership withMini Challengehas allowed Forge Motorsport to test Forge Motorsport'sAbarth 500/595/695componentswithin a highly competitive motorsport series and helps Forge Motorsport to highlight areas to develop on other products. The Mini Challenge JCW class use a homologated Forge Motorsport intake, which utilises the cold air feed from the scuttle panel to maximise the density charge of air entering the turbo intake.
⭐ Great cost-effective touch to add to an Abarth, sits nice and flush with quick clip on install ⭐
FMINLD3 was developed specifically forRHD applications. Whilst it is compatible with the LHD scuttle panel, there is minimal functional benefit when fitted to LHD vehicles, due to a blank located directly beneath the designated mounting area. Forge Motorsport is currently exploring the possibility of a template for quick and easymodification to the LHD scuttle, which would allow airflow to be channeled towards the induction inlet more effectively. If proven feasible, this template will be made available retrospectively to LHD owners.
After valuable iterations of design, Forge Motorsport settled for a solution that perfectly follows the contours of the scuttle panel to ensure a snug fit tocapture as much cold air as possible. 3D-scanning, SolidWorks 3D CAD, and 3D printing gave Forge Motorsport the ability to test the differences between width, height and fitment of the inlet duct to finish up with the perfect design to suit FMINDF500. By capturing the washer jet inside the inlet duct it allows for a much wider design tomaximise airflow,and helps with installation.
Forge Motorsport has spared no expense as per usual with the manufacture of this design, by having billet injection mould tooling created to produce a part with anOEM+ aesthetic.By testing
Vehicle Fitment
- Fiat – 500 – Abarth (Pre 595, 2008-2015)
- Fiat – 595 Abarth – 145/165 BHP
- Fiat – 595 Abarth – 180 BHP
- Fiat – 695 Abarth – 180 BHP
