Forge Motorsport Turbo Inlet Adaptor for VAG 1.0 TSI 2022- — Turbo Inlet Adaptor for Audi A1 A1 25/30 1.0 TSI/TFSI 2022- (GB). Technical specifications and compatibility are based on Forge Motorsport product data.
Product Details
This product can’t be used in conjunction with FMINLH26
With the interest of tuning the VAG 1.0 TSI engines growing ever more, Forge Motorsport's R&D department has designed another product toextract extra power.The product in question is Forge Motorsport's enlarged turbo elbow. The OEM part’s design requirements are a balance between performance, efficiency, and refinement. Here at Forge Motorsport, Forge Motorsport has concentrated on the performance aspect of the product, which has been achieved by removing the internal restrictions then enlarging and smoothing out the pathway to the turbo.
Several different designs and material choices were tested until Forge Motorsport arrived with the product you see here. The construction of FMTIA13 is manufactured fromreinforced multi ply siliconewhich is more durable than the OEM plastic pipe and it wont suffer from heat soak like a metallic product can. With itsenlarged capacity and less restrictive surface areait routes air directly into your turbo charger and allows a greater volume of air to be compressed, this has a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger.
This is a product which is essential when tuning the 1.0 TSI engine (DLAA, DLA) as it was an area where Forge Motorsport saw positive gains when tuning the previous generation VAG 1.0 TSI. On a tuned vehicle Forge Motorsport would expect to seeconsistent gains of 3-5 bhpdepending on the vehicles state of tune.
This is a straightforward yetvery effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 30 minutes.As with all Forge Motorsport products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible.
Vehicle Fitment
- Audi – A1 – A1 25/30 1.0 TSI/TFSI 2022- (GB)
- Audi – A3 – 8Y (2020-) – 1.0 TSI (30 TFSI)
- Audi – Q2 – 1.0 TSI (2022-)
- Seat – Arona – 1.0 TSI (2022-)
- Seat – Ateca – 1.0 TSI (2022-)
- Seat – Ibiza – Mk5 (KJ) 2021- – 1.0 TSI
- Seat – Leon – Mk4 2022- – 1.0 TSI
- Seat – Leon – Mk4 2022- – 1.0 TSI FR
- Skoda – Fabia – PJ 2022- – 1.0 TSI
- Skoda – Kamiq – 1.0 TSI (2022-)
- Skoda – Karoq – 1.0 TSI (2022-)
- Skoda – Octavia – Mk4 NX 2020- – 1.0 TSI
- Skoda – Scala – 1.0 TSI (2022-)
- Volkswagen – Golf – MK8 – 1.0 TSI (2022-)
- Volkswagen – Polo – Mk6 AW (2017-) – 1.0 TSI (2022-)
- Volkswagen – T-Cross – 1.0 TSI (2022-)
- Volkswagen – T-Roc – 1.0 TSI (2022-)
- Volkswagen – Taigo – 1.0 TSI (2022-)
